Search
Close this search box.

WalkMed 350VL Infusion Pump

30+ years of industry-leading accuracy

Your reliable and patient-preferred solution for 5FU continuous chemotherapy infusion

The WalkMed 350VL electronic pump is the trusted choice for colon-related or other cancer treatment worldwide. With up to five times the accuracy of a disposable pump and no recalls throughout our decades in business, we reduce the stress and complexities of ambulatory infusion and allow patients and providers to focus on care.

Lightweight and portable

At just 12 ounces, the WalkMed 350VL is designed for portability and is easy for patients to maneuver.

Accessible 9V battery

The battery is clearly visible and simple for patients to change at home if needed. 9V batteries are widely available–and can even be sourced from home smoke detectors in a pinch.

Easy to program

The 350VL pump features large, intuitive buttons that program infusion parameters in just a few steps. The pump retains the programmed parameters and can easily be locked to prevent accidental changes.

Only critical alerts

Unnecessary alarms interrupt patient therapy and disrupt peace of mind. The 350VL pump features a targeted alarm system that ensures patient safety without false alerts.

Why choose the walkMed 350VL over an elastomeric pump?

Accuracy

With a ±5% delivery accuracy, the WalkMed 350VL is up to five times more precise than most disposable infusion pumps.

Easy to Fill

The WalkMed pump uses an empty reservoir bag that is easy to fill and remove air from.

Built to Withstand Daily Life

The 350VL pump has a rigid outer casing, so patients can go about their days without worrying about crushing their pump or keeping it in a specific position.

24/7 Support

We’re here to help–however and whenever you need it. We offer a 24/7 helpline for both patients and providers.

Targeted Alarm System

The 350VL pump offers the crucial alarms needed to guarantee patient safety–without any known “nuisance” alarms.

Download the Product Catalog

Find specs and other crucial information in our pump catalog.

Try the 350VL Pump for Free

Don’t just read about it–experience the WalkMed difference for yourself. Request a free trial via the form below.

Bundle Everything You Need for Patient Care

We understand the complexities of ordering pumps and accessories separately, which is why we’ve created a comprehensive WalkMed kit that includes a pump, battery, patient pouch, training materials, keypad cover, and 2 sizes of reusable medication bag covers. Fill out the form below to order yours.

What Our Clients Are Saying

Real Opinions From Real People

Technical Information about the WalkMed 350VL pump

Specifications

 
Dimensions 4.4 x 4.0 x 1.5 in. (includes front cover)
Weight 12 oz (includes battery and front covers)
Accuracy +/- 5%
Infusion Mode Continuous
Flow Rate 0.10 – 19.99 mL/hr (0.01 mL resolution) 20.0 – 30.0 mL/hr (0.10 mL resolution)
Total Programmable Volume Limit 1 – 1,999 mL
Reservoir Volume 65, 150, 250 mL bags
Power 9 volt battery (alkaline)
Typical Battery Capacity 450 mL @ 1 mL/hr – 18.7 Days 650 mL @ 10 mL/hr – 2.7 Days 500mL @ 30 mL/hr – 0.7 Days
Alarms/Alerts System Idle, Downstream Occlusion, Low Battery, Depleted Battery, Data Entry Error, Clamp Bar Open, System Malfunction, End of Infusion Notice, KVO Reached, Under-Delivery, Over-delivery

KVO Rates

When the Total Volume Limit has been reached, the pump will beep three times, the Status LED will blink yellow and the pump will continue delivery at one of the following End of Infusion KVO (keep vein open) rates:
 
If the Basal Flow Rate was programmed to: KVO Flow rate will be:
> 1.0 ml/hr 0.5 ml/hr
< 1.0 ml/hr and > 0.2 ml/hr 0.2 ml/hr
< 0.2 ml/hr Programmed Basal Rate

Frequently Asked Questions (FAQs)

We're Here To Help

We recommend your pump undergo maintenance on an annual basis. Watch our video tutorial to find out more.
We recommend using a Duracell® brand MN1604, Medline MPHB, or equivalent 9-volt alkaline battery.
Clean the surfaces of the pump using a cloth dampened with water, mild cleanser, or a diluted solution of a mild dish-washing detergent. Avoid using caustic/acidic solvents such as paint thinner or lacquer remover. Watch our video tutorial to find out more.
To replace the battery, first remove the front cover from the pump. Stop medication delivery and then turn the pump power off. Place your thumb on top of the battery, and push down and away from the terminals. Once the battery is disconnected, lift the battery out of the battery compartment. Dispose of the battery according to the battery manufacturer’s recommendations and in accordance with applicable environmental regulations. Wait approximately 15 seconds between removing the battery and installing the new battery, to allow the pump to turn on properly. Watch our video tutorial to find out more.
It’s likely that the volume from the previous infusion was not cleared. Watch our video tutorial to find out more.

WalkMed reservoir bags come in three different sizes: 65mL, 150mL, and 250mL. All sizes are designed to accommodate 10% overfill.

All WalkMed administration sets and reservoir bags are DEHP-free and safe to use.

"*" indicates required fields


Ready to get in touch?


Contact us about the WalkMed 350VL pump

Name*
Hidden
Hidden
Hidden
Hidden
Hidden
Hidden
This field is for validation purposes and should be left unchanged.

Contact Us Today

"*" indicates required fields

Name*
Hidden
Hidden
Hidden
Hidden
Hidden
Hidden
Hidden
This field is for validation purposes and should be left unchanged.